你们好，最近小艾特发现有诸多的小伙伴们对于中频炉，中频这个问题都颇为感兴趣的，今天小活为大家梳理了下，一起往下看看吧。

1、打开包装盒，取出主机、电机插线和自粘电极；

2、Open the packaging box and take out the main machine, electrode wire and self-adhesive electrodes;

3、电极插线的一端插入主机，另一端插入两片自粘电极；

4、One port of the electrode wireis inserted into the main machine, and the other pulse port is inserted into two self-adhesive electrodes;

5、揭开自粘电极的保护膜，把两片自粘电极分开，贴到患处；

6、Uncover the protective film of the self-adhesive electrode, separate the two self-adhesive electrodes and stick them to the affected parts;

7、开机或关机——按主机电源开关持续3秒钟；

8、Power on or off -- press the host power switch for 3 seconds;

9、根据需要选择“针灸”、“按摩”、“锤击”、“刮痧”等治疗方法；

10、Select "acupuncture", "massage", "hammer" and "scraping" as needed;

11、脉冲强度选“+”加强，选“-”减弱；

12、Select "+" to enhance pulse intensity and "-" to decrease it;

13、停止治疗前先关机再取下自粘电极，并贴回保护膜上；

14、Power off before stopping treatment, then remove the self-adhesive electrodes and paste them back onto the protective film;

15、如果自粘电极不粘，可用自来水冲洗，晾干再用。

16、If the self-adhesive electrodesare not sticky,wash with tap waterand let dry before use.

以上就是中频这篇文章的一些介绍，希望对大家有所帮助。